Skip to content
TV Remotely
Get

Everyday control

Find a lost Roku remote with the remote finder feature

Roku Remote Finder works only with compatible voice remotes that have a built-in speaker. Roku says to look for small speaker holes on the remote back. Trigger the finder from the Roku app, a compatible player/TV control, or hands-free voice on supported Voice Remote Pro models.

Published by TV Remotely · Source checked 2026-10-29. Model and firmware behavior can differ; device tests are named only where performed.

Confirm the remote has a speaker

Roku lists Enhanced Voice Remote and Voice Remote Pro (2nd edition) as examples of compatible speaker-equipped remotes. A basic remote without a built-in speaker cannot play the finder sound; use the Roku app or a replacement remote instead.

  1. Identify the lost remote from its model, packaging or saved product details; Roku’s finder requires a compatible voice remote with a built-in speaker.

    If you find the remote later, small speaker holes on its back are Roku’s visual compatibility check.

    If that does not help: If there are no holes, the finder sound feature may not be available.

  2. In the official Roku mobile app, open Devices, connect to the intended Roku, tap its three-dot menu and choose Ping Remote. Alternatively use Settings > Remotes & devices > Remotes > your remote > Find remote.

    A compatible remote should play a sound for up to 60 seconds.

    If that does not help: Press any remote button to stop the sound once found.

  3. On supported Voice Remote Pro, use the hands-free command if hands-free voice was enabled.

    Roku documents “Hey Roku, where’s my remote?” for those models.

    If that does not help: If voice was not enabled or did not hear you, use the app or device controls.

If the remote does not make a sound

If you cannot use the mobile app, some Roku players, such as supported Roku Ultra models, have a physical Remote Finder button on the top or side. Press it to trigger the compatible remote. Roku TV panel controls differ by model; check the TV manual for its Find Remote option.

Roku says finder sound may fail if alkaline batteries are dead, a rechargeable remote battery is too low, or the remote is out of range of the wireless network. Recharge/replace batteries, move closer, and try once more. Some Roku players have a physical Finder button; availability depends on model.

What to do next

Use Remote Finder only with a compatible speaker-equipped Roku remote; low battery or network range can silence it.

Sources and verification

Frequently asked questions

Will Remote Finder work on every Roku remote?
No. Roku says the lost remote finder requires a compatible voice remote with a built-in speaker.
Why is my Roku remote finder silent?
Roku lists low or dead batteries and being out of wireless range among causes.